Page Comparison

function Decode(fPort, bytes) {
    switch (fPort) {
    case 1:
  case  1:  {
        var output = {};
        var decoded = {};

       var outputdecoded.DEV_EUI = {LoRaObject.devEUI;
        decoded.RSSI = LoRaObject.rxInfo[0].rssi;
         Current_Valve_Position: bytesdecoded.SNR = LoRaObject.rxInfo[0],.loRaSNR;
        decoded.Data = LoRaObject.data;
        decoded.ADR = LoRaObject.txInfo.adr;
 Flow_Sensor_Raw: bytes[1] * 0.5,    decoded.coderate = LoRaObject.txInfo.codeRate;
        decoded.FCnt = LoRaObject.fCnt;
   Flow_Temperature: bytes[2] * 0.5,  decoded.Port = LoRaObject.fPort;
        decoded.Frequency = LoRaObject.txInfo.frequency;
     Ambient_Sensor_Raw: bytes[3] * 0decoded.25,Modulation = LoRaObject.txInfo.dataRate.modulation;
        decoded.Bandwidth = LoRaObject.txInfo.dataRate.bandwidth;
       Ambient_Temperature: bytes[4] * 0.25, decoded.SpreadingFactor = LoRaObject.txInfo.dataRate.spreadFactor;

        output.Current_Valve_Position = bytes[0];
        Energy_Storage:output.Flow_Sensor_Raw = bytes[51] >> 6 & 0x01,* 0.5;
        output.Flow_Temperature = bytes[2] * 0.5;
         Harvesting_Active:output.Ambient_Sensor_Raw = bytes[53] >> 5 & 0x01,* 0.25;
        output.Ambient_Temperature = bytes[4] * 0.25;
         Ambient_Sensor_Failure:output.Energy_Storage = bytes[5] >> 46 & 0x01,;
        output.Harvesting_Active = bytes[5] >> 5 & 0x01;
        Flowoutput.Ambient_Sensor_Failure: = bytes[5] >> 34 & 0x01,;
        output.Flow_Sensor_Failure = bytes[5] >> 3 & 0x01;
        output.Radio_Communication_Error: = bytes[5] >> 2 & 0x01,;
                    output.Received_Signal_Strength: = bytes[5] >> 1 & 0x01,;
                    output.Motor_Error: = bytes[5] >> 0 & 0x01,;
                    output.Storage_Voltage: = Number((bytes[6] * 0.02).toFixed(2)),;
                    output.Average_Current_Consumed: = bytes[7] * 10,;
                    output.Average_Current_Generated: = bytes[8] * 10,;
                    output.Reference_Completed: = bytes[9] >> 4 & 0x01,;
                    output.Operating_Mode: = bytes[9] >> 7 & 0x01,;
                    output.Storage_Fully_Charged: = bytes[9] >> 6 & 0x01,
                };

               if (bytes.length === 11) {
                    var um = bytes[9] & 0x03;
          var uv         if = (um === 0) {
                        var uv = ? bytes[10]                     }
                    else {
                        var uv = : bytes[10] * 0.5
 ;
                  }
                    output.User_Mode = um
        ;
           output.User_Value = uv
      ;
         }

        return {status:      return output;
    decoded, uplink_decoded: output};
       }
 
      default:
            return {
      
         errors: ['unknown FPort'],
    
       };
   }
}

}