...
BYTE | BIT RANGE | SIZE | OFFSET | ABBREV. | DETAILS | |
1 | DB0.7 | 1 | 0 | ON | Devices will stay on regardless of 6-week Reference Run results 0 = If a 6-week Reference Run fails, device will switch off 1 = Device will stay on regardless of 6-week Reference Run results | |
DB0.6 | 1 | 1 | REC | Do a Recalibration Now 1 = Do a Recalibration Now Regardless of whether device is mounted or unmounted, after a Recalibration it the device will continue operating | ||
DB0.5…0.1 | 5 | 2 | RESERVED | |||
DB0.0 | 1 | 7 | OFF | Switch OFF the device 1 = Device will move to mounting position and switch OFF | ||
...
BYTE | BIT RANGE | SIZE | OFFSET | ABBREV. | DETAILS | |
1 | DB0.7 | 1 | 0 | ON | Devices will stay on regardless of 6-week Reference Run results 0 = If a 6-week Reference Run fails, device will switch off 1 = Device will stay on regardless of 6-week Reference Run results | |
DB0.6 | 1 | 1 | REC | Recalibration was Done 1 = The previous Downlink was an FPORT 0x08 Downlink instructing a Recalibration. Between the previous Downlink and this Uplink, a Recalibration was performed. Recalibration result is displayed in FPORT 0x01 Uplink bit CAL. | ||
DB0.5…0.1 | 5 | 2 | RESERVED | |||
DB0.0 | 1 | 7OFF | RESERVED Switch OFF the device 1 = Device will move to mounting position and switch OFF (This will not be seen, because the device will switch off before sending a response FPORT 0x08 Uplink. The FPORT 0x01 Uplink OFF will be seen.)OFF response will be displayed in FPORT 0x01 Uplink bit OFF. | |||
Port 1 Bit 9.4 “REFC” will be renamed to “CAL”:
...