Page Comparison

FPort Number	Type of operation	Payload length	Description	Comments
0x00	MAC Commands	8 Bytes	RESERVED
0x01	Valve position % mode Temperature setpoint mode (°C) with ambient or external temperature sensor	Downlink: 6 Bytes Uplink: 11 Bytes	Actuator operation mode with valve position % Self-regulation mode using the requested ambient setpoint temperature	Strongly recommended to always use an external temperature sensor
0x02	Report: REV Hardware Version Firmware Version	Downlink: 0 Bytes Uplink: 6 Bytes	Request: REV Hardware Version Firmware Version
0x03	Motor Travel Distance	Downlink: 1 Byte Uplink: 1 Byte	Configure motor travel distance (mm)
0x04	Data Rate	Downlink: 1 Byte Uplink: 1 Byte	Configure LoRa data rate	Only supported in the MLR003R/ Radiator product line.

MLR003F/ Domestic Hot Water product line is using ADR.

0x05

Slow Harvesting (SH) and valve Opening Point Detection (OPD)

Downlink:
1 Byte

Uplink:
1 Byte

Only supported in the MLR003R/ Radiator product line.

0x06

Temperature Drop Detection (TDD)

Downlink:
1 Byte

Uplink:
1 Byte

Configure response to Detection of a Temperature Drop

Only supported in the MLR003R/ Radiator product line.

0x07

PI Temperature Control

Downlink:
2 Bytes

Uplink:
2 Bytes

Configure the PI-Coefficients

Domestic hot water MLR003F is using ADR.

Versions Compared