...
BYTE | BIT RANGE | SIZE | OFFSET | ABBREVIATION | DETAILS | |||||||
1 | DB0.7 | 1 | 0 | MSET | Set the Motor Operating Range 1 = Set the Motor Operating Range | |||||||
DB0.6…0.4 | 3 | 1 | RESERVED | |||||||||
DB0.3…0.0 | 4 | 4 | MV | Motor Operating Range Value
| ||||||||
0b0000 | Default (2.56048mm) | |||||||||||
0b0001 | RESERVED | |||||||||||
0b0010 | RESERVED | |||||||||||
0b0011 | RESERVED | |||||||||||
0b0100 | RESERVED | |||||||||||
0b0101 | RESERVED | |||||||||||
0b0110 | RESERVED | |||||||||||
0b0111 | 1.456mm | |||||||||||
0b1000 | 1.664mm | |||||||||||
0b1001 | 1.872mm | |||||||||||
0b1010 | 2.080mm | |||||||||||
0b1011 | 2.288mm | |||||||||||
0b1100 | 2.496mm | |||||||||||
0b1101 | RESERVED | |||||||||||
0b1110 | RESERVED | |||||||||||
0b1111 | RESERVED | |||||||||||
| Orah footnotes display |
|---|
Note: Sending an FPORT 0x03 Downlink will cause the device to respond with an FPORT 0x03 Uplink. Thus, to get Motor Operating Range details To receive an Uplink without changing any optionssettings, send an empty FPORT 0x03 Downlink, or an FPORT 0x03 Downlink with 0s.
UPLINK
BYTE | BIT RANGE | SIZE | OFFSET | ABBREVIATION | DETAILS | |
1 | DB0.7…0.4 | 4 | 0 | RESERVED | ||
DB0.3…0.0 | 4 | 4 | MV | Motor Operating Range Value | ||
0b0000 | Default (2.56048mm) | |||||
0b0001 | RESERVED | |||||
0b0010 | RESERVED | |||||
0b0011 | RESERVED | |||||
0b0100 | RESERVED | |||||
0b0101 | RESERVED | |||||
0b0110 | RESERVED | |||||
0b0111 | 1.456mm | |||||
0b1000 | 1.664mm | |||||
0b1001 | 1.872mm | |||||
0b1010 | 2.080mm | |||||
0b1011 | 2.288mm | |||||
0b1100 | 2.496mm | |||||
0b1101 | RESERVED | |||||
0b1110 | RESERVED | |||||
0b1111 | RESERVED | |||||