Page Comparison

This guide provides steps to setup the

...

MTCAP Gateway with Automatic Configuration applied

\uD83D\uDCD8 Instructions

Setting Up Gateway

1. Assign a fixed IP to your computer from “Network and Sharing Centre

...

2. Open a web browser and type in the IP Address of the Gateway 192.168.2.1 and ignore the warning

...

2. Enter User name as “Guest“, preferred Password and Login to the Gateway

...

...

1. Click the close button on the First-Time Setup Wizard

...

2. Go to Administration → Save/Restore → Save and Restore Configuration → Restore Configuration from File

3. Click Browse and select the config file tarball package *.tar.gz and Click Restore

...

2. Wait for the device to Reboot. After succesful Reboot, the status LED blinks twice continuously and the LoRa LED stays permanently ON

...

1. Open “Network and Sharing Centre“ and restore settings back to automatic

...

2. Open your browser and type in the IP of the Gateway 192.168.10.252

...

2. The Gateway is now configured and running as a Network Server

...

1. You can add new users from the Administration → User Accounts

...

Setting Up MQTT

1. Open PuTTY and log in into the gateway

2. Create an install script by typing the following command sudo nano install_script.sh

...

2. Paste the following code into the window

3. Code Block

...

1. #!/bin/sh echo Setting Up MQTT file="/etc/mosquitto/mosquitto.conf" echo "pid_file /var/run/mosquitto.pid" > $file echo "user root" >> $file echo "port 1883" >> $file echo "protocol mqtt" >> $file echo "log_dest file /var/log/mosquitto.log" >> $file echo "log_type error" >> $file echo "log_type warning" >> $file echo "log_type notice" >> $file echo "log_type information" >> $file echo "log_type subscribe" >> $file echo "connection_messages true" >> $file echo "log_timestamp true" >> $file echo "allow_anonymous false" >> $file echo "password_file /etc/mosquitto/passwords.txt" >> $file cat $file cd /etc/mosquitto printf "LikeARecordBaby\nLikeARecordBaby" | sudo mosquitto_passwd -c passwords.txt valve sudo mosquitto_passwd -b passwords.txt Guest MVA-LoRa sudo /etc/init.d/mosquitto stop sudo /etc/init.d/mosquitto start -c /etc/mosquitto/mosquitto.conf

2. Press Ctrl+X and Press Y to save the script

...

2. Run the script by typing the following command sudo bash install_script.sh

...

1. The MQTT settings should be successfully set up and running

...

Check Mycorrhiza

1. Open the Mycorrhiza Tool and Click Scan for MQTT Hosts

2. Your Gateway should appear in the list of available hosts

...

2. Use your Login and Password to login to Mycorrhiza and verify the device communication

...