Use and safety instructions:
This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or a lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the device by a person responsible for their safety.
This product is not a toy. Children shall be advised to refrain from playing with it.
The metallic part of the unit’s housing serves as a heat sink. Be sure that the air circulation around it is not obstructed by furniture, curtains, plants, or any other object.
If the device has been stored in a cold environment, make sure that it resumes close to room temperature before use. This is to prevent damaging due to condensation.
The thermostatic head is designed for indoor use only. Do not allow the thermostatic head to get wet. Its sensitive electronics can be affected.
The unit is best cleaned with a dry or slightly damp cloth. Do not use aggressive cleaning agents or solvents.
Refrain from exposing the unit to environmental stress such as high mechanical forces (do not step on it), strong vibrations, direct sunlight or extreme temperatures.
The unit must not be disassembled or modified. There are no user-serviceable parts inside.
Be aware that correct operation can be affected by strong electromagnetic fields. Typical sources of such are mobile phones, 2-way radios, RC transmitters, microwave ovens, electric motors.
The thermostatic head has been designed and must solely be used for the purpose of controlling a M30 x 1.5 circulation valve. Any other use may pose a hazard to the device itself, to the equipment involved, or to the health of the user.
When operating the device in a workplace environment, be sure to observe the workplace regulations that may apply.
Intended use: The self-powered thermostatic head is suitable solely for controlling water-filled heating radiators. Any other use – including control of floor heating systems – is not permitted and can result in malfunctions or damage. Do not disassemble or modify any part of the product. It is important to comply with the safety notice included in these operating instructions.
In case of questions, please contact:
Micropelt - a brand of EH4 GmbH. Email: info@micropelt.com. Telephone +49 7665 932183 0
| Include Page | ||||
|---|---|---|---|---|
|