...
Rev.-No.
...
Description of Revision
...
Revised
by
...
Date
...
...
v8e has been derived from the Micropelt technology platform description v7e.
Changed name to MLR003.
Document describes the first release of MLR003.
Most recent changed against the general-purpose platform description.
...
...
...
v8e
...
Removed Summer mode
Added 480min RF CI in Payload
Added temperature offset for valve- and ambient-sensor.
Added harvesting halt during radio communication.
...
Schmidt
Volkert
...
2021-01-21
...
v10e
...
Change product name to MLR003
General update on description and user guide
...
Volkert
...
2021-06-21
...
v11e
...
Change downlink payload
Added Label spec.
...
Becky
Volkert
...
2021-06-22
...
v12e
...
Change Activating from Mounting Position operating flow diagram
Changed front page picture of MLR003
...
Becky
Volkert
...
2021-08-04
2021-08-20
...
v13e
...
Full document review
Update cover page, headlines, added sect. 7.2
...
Becky
Volkert
...
2021-09-22
2021-09-23
...
v14e
...
Adjust speaker beeping communication in user interface
Added SF7BW125 to front page
Removed downlink “reserved” bytes 7 and 8
Added picture of MLR003-KEY
...
Becky
Volkert
...
2021-09-28
2021-10-11
...
v15e
...
Added clauses and information required by product safety, EN60335-1:2012.
Described the position of the labels
Corrected distortion of “CE”-print on product label
...
Schmidt
...
2021-11-05
...
v16e
...
Added certification details
Added contact email devicecredentials@micropelt.com
Corrected NFC-Tag label (16.2)
...
Volkert
...
2021-11-19
...
v17e
Update from Rev1.0 to Rev1.1:
...
| Include Page |
|---|
...
Extend motor Reference Run travel distance
Added declaration of conformity (CE)
...
Becky
Volkert
...
2022-01-24
...
Added new section 09.11 Battery Charging Flow Chart
...
Bala
...
2022-02-16
...
Changed product name and article number to MLR003RiEU61-07-1.1
...
Volkert
...
2022-02-23
...
v18e
...
Update from Rev1.1 to Rev1.3:
Remote Commissioning:
Port 2: Version
Port 3: Motor Travel Distance
Port 4: LoRa Data Rate
...
Becky
...
2022-05-26
...
v18e
...
Update from REV 1.3 to REV1.4
Increased Zero Drift Compensation range to 30%
...
Bala
...
2022.11.30
...
v18e
...
Update from REV 1.4 to REV1.5
Increased Motor Force to reduce Zero Drift
...
Bala
...
2023.01.20
...
v18e
...
Update from REV 1.5 to REV1.6
Reduce default Ambient Temperature from 20°C to 19°C
Reduce ACK frequency from every Uplink to up to every 30 minutes
...
Bala
...
2023.01.23
...
v18e
...
Update from REV 1.6 to REV1.8
ESD protection:
While in Mounting, set a timer for 8 hours. Every 8 hours, wake up and (re)set to radio to Sleep Mode, and (re)configure the reed contact.
...
Bala
...
2023.03.27
...
| hidden | true |
|---|---|
| name | version_number |
...
|