...
Milesight Codec Uplink Decoder
| Code Block | ||
|---|---|---|
| ||
function Decode(fPort, bytes) {
switch (fPort) {
case 1:
{
var output = {};
var decoded = {};
decoded.DEV_EUI = LoRaObject.devEUI;
decoded.RSSI = LoRaObject.rxInfo[0].rssi;
decoded.SNR = LoRaObject.rxInfo[0].loRaSNR;
decoded.Data = LoRaObject.data;
decoded.ADR = LoRaObject.txInfo.adr;
decoded.coderate = LoRaObject.txInfo.codeRate;
decoded.FCnt = LoRaObject.fCnt;
decoded.Port = LoRaObject.fPort;
decoded.Frequency = LoRaObject.txInfo.frequency;
decoded.Modulation = LoRaObject.txInfo.dataRate.modulation;
decoded.Bandwidth = LoRaObject.txInfo.dataRate.bandwidth;
decoded.SpreadingFactor = LoRaObject.txInfo.dataRate.spreadFactor;
output.Current_Valve_Position = bytes[0];
output.Flow_Sensor_Raw = bytes[1] * 0.5;
output.Flow_Temperature = bytes[2] * 0.5;
output.Ambient_Sensor_Raw = bytes[3] * 0.25;
output.Ambient_Temperature = bytes[4] * 0.25;
output.Energy_Storage = bytes[5] >> 6 & 0x01;
output.Harvesting_Active = bytes[5] >> 5 & 0x01;
output.Ambient_Sensor_Failure = bytes[5] >> 4 & 0x01;
output.Flow_Sensor_Failure = bytes[5] >> 3 & 0x01;
output.Radio_Communication_Error = bytes[5] >> 2 & 0x01;
output.Received_Signal_Strength = bytes[5] >> 1 & 0x01;
output.Motor_Error = bytes[5] >> 0 & 0x01;
output.Storage_Voltage = Number((bytes[6] * 0.02).toFixed(2));
output.Average_Current_Consumed = bytes[7] * 10;
output.Average_Current_Generated = bytes[8] * 10;
output.Reference_Completed = bytes[9] >> 4 & 0x01;
output.Operating_Mode = bytes[9] >> 7 & 0x01;
output.Storage_Fully_Charged = bytes[9] >> 6 & 0x01;
if (bytes.length === 11) {
var um = bytes[9] & 0x03;
var uv = (um === 0) ? bytes[10] : bytes[10] * 0.5;
output.User_Mode = um;
output.User_Value = uv;
}
return {status: decoded, uplink_decoded: output};
}
default:
return {
errors: ['unknown FPort'],
};
}
}
|
Milesight Codec Uplink Decoder
| Code Block |
|---|
/*
Possible values:
"UserMode":"Set_Point_Ambient_Temperature", "Valve_Position"
"SafetyMode":"Set_Point_Ambient_Temperature", "Valve_Position"
"Radio_Communication_Interval": 5,10,60,120,480
"Do_Reference_Run_Now": 0,1
"P_Controller_Gain": 1,2,3,4
"FSOC": "+1","+2","+3","+4","+5","+6","+7","-1","-2","-3","-4","-5","-6","-7","-8"
Example Downlink Object
{
"UserMode":"Set_Point_Ambient_Temperature",
"UserValue":20,
"SafetyMode":"Set_Point_Ambient_Temperature",
"SafetyValue":20,
"Room_Temperature_from_RCU":0,
"Radio_Communication_Interval":10,
"FSOC":"+3",
"Do_Reference_Run_Now":0,
"P_Controller_Gain":1
}
*/
function get_set_point_value(mode, value) {
if (mode === "undefined") {
throw "Enter Mode";
}
else if (value === "undefined") {
throw "Enter Value";
}
else {
switch (mode) {
case "Set_Point_Ambient_Temperature":
return value*2.0;
case "Valve_Position":
return value;
default:
throw "Invalid UserMode";
}
}
}
function get_room_temperature_from_rcu(obj) {
if (typeof obj.Room_Temperature_from_RCU === "undefined") {
throw "Check Room_Temperature_from_RCU";
}
else {
return obj.Room_Temperature_from_RCU;
}
}
function prepare_radio_communication_interval(obj) {
if (typeof obj.Radio_Communication_Interval === "undefined") {
throw "Enter Radio Communication Interval";
}
else {
switch (obj.Radio_Communication_Interval) {
case 10:
return "0000";
case 5:
return "0001";
case 60:
return "0010";
case 120:
return "0011";
case 480:
return "0100";
default:
throw "Invalid Radio Communication Interval";
}
}
}
function prepare_set_point_mode(obj) {
if (typeof obj === "undefined") {
throw "Enter Mode";
} else {
switch (obj) {
case "Set_Point_Ambient_Temperature":
return "10";
case "Valve_Position":
return "00";
default:
throw "Invalid Mode";
}
}
}
function get_byte_3(obj) {
var rci_value = prepare_radio_communication_interval(obj);
var user_mode_value = prepare_set_point_mode(obj.UserMode);
var safety_mode_value = prepare_set_point_mode(obj.SafetyMode);
var byte_3 = rci_value
+ user_mode_value
+ safety_mode_value;
var byte_3_converted = parseInt(byte_3, 2);
return byte_3_converted;
}
function get_flow_sensor_offset_compensation(obj) {
if (typeof obj.FSOC == "undefined") {
throw "Enter FSOC";
} else {
switch (obj.FSOC) {
case "+3":
return parseInt("0000"+"0000", 2);
case "+1":
return parseInt("0001"+"0000", 2);
case "+2":
return parseInt("0010"+"0000", 2);
case "+3":
return parseInt("0011"+"0000", 2);
case "+4":
return parseInt("0100"+"0000", 2);
case "+6":
return parseInt("0110"+"0000", 2);
case "+7":
return parseInt("0111"+"0000", 2);
case "-8":
return parseInt("1000"+"0000", 2);
case "-7":
return parseInt("1001"+"0000", 2);
case "-6":
return parseInt("1010"+"0000", 2);
case "-5":
return parseInt("1011"+"0000", 2);
case "-4":
return parseInt("1100"+"0000", 2);
case "-3":
return parseInt("1101"+"0000", 2);
case "-2":
return parseInt("1110"+"0000", 2);
case "-1":
return parseInt("1111"+"0000", 2);
default:
throw "Invalid FSOC";
}
}
}
function get_reference_run_bits(obj) {
if (typeof obj.Do_Reference_Run_Now === "undefined") {
throw "Enter Do_Reference_Run_Now Bit";
} else {
switch (obj.Do_Reference_Run_Now) {
case 1:
return "1";
case 0:
return "0";
default:
throw "Invalid Do_Reference_Run_Now Bit";
}
}
}
function get_p_gain_bits(obj) {
if (typeof obj.P_Controller_Gain === "undefined") {
throw "Enter P_Controller_Gain";
} else {
switch (obj.P_Controller_Gain) {
case 1:
return "10";
case 2:
return "11";
case 3:
return "00";
case 4:
return "01";
default:
throw "Invalid P_Controller_Gain";
}
}
}
function get_byte_5(obj) {
var ref_bit = get_reference_run_bits(obj);
var p_gain_bit = get_p_gain_bits(obj);
var byte_5 = ref_bit + p_gain_bit + "00000";
return (parseInt(byte_5, 2));
}
function Encode(fPort, obj) {
var encoded = [];
encoded[0] = get_set_point_value(obj.UserMode, obj.UserValue);
encoded[1] = get_room_temperature_from_rcu(obj);
encoded[2] = get_set_point_value(obj.SafetyMode, obj.SafetyValue);
encoded[3] = get_byte_3(obj);
encoded[4] = get_flow_sensor_offset_compensation(obj);
encoded[5] = get_byte_5(obj);
return encoded;
}
|