...
BYTE | BIT RANGE | SIZE | OFFSET | ABBREVIATION | DETAILS | ||||||||||||||
1 | DB0.7…0.0 | 8 | 0 | KP | P Coefficient 0 … 25.5255 Default = 0x18 0x0A = 2.410 Resolution = 0. 1 | ||||||||||||||
2 | DB1.7…1.0 | 8 | 8 | KI | I Coefficient 0 … 5.12 Default = 0x03 0x4B = 01.065 Resolution = 0.02 | ||||||||||||||
3 | DB2.7…2.0 | 8 | 16 | KD | D Coefficient 0 … 51.2 Default = 0x6F 0x00 = 22.20 Resolution = 0.2 | ||||||||||||||
4 | DB3.7…3.177 | 8 | 24 | RESERVED | DB3.0 | 1 | 31 | IU | Integral Unwind If device reaches 0% and room is still too warm, or if device reaches 100% and room is still too cold: 0 = set
1 = set
Default = 0 | Operating Style 1: Standard PID Controller | |||||||||
DB3.6…3.0 | 25 | RESERVED | |||||||||||||||||
5 | DB4.7…4.0 | 8 | 32 | CP | Closed Percent Minimum percent that device will close to Default = 0% | ||||||||||||||
6 | DB5.7…5.0 | 8 | 40 | KD0 | D Coefficient when closed 0 … 51.2 Default = 0x00 = 0.0 Resolution = 0.2 | ||||||||||||||
7 | DB6.7…6.0 | 8 | 40 | OFP | Offset Percent Percentage Offset to be added to PID Output Default = 0x00 = 0% |
To receive an Uplink without changing any settings, send an empty Downlink.
...