| Installation | Normalbetrieb | Ruhezustand | Funkausfall | Erzwungenes Heizen | Frostschutz |
Kommentare |
| Ventilziel % Oder Raum-Solltemperatur
| Phasen zwischen Überwachung und Kommunikation | Uplinks werden nicht vom Gateway empfangen | Ventil öffnet zu 50 % (oder bleibt in der aktuellen Position, wenn die aktuelle Position 50 % beträgt) | Ventil öffnet zu 95 % (oder bleibt in der aktuellen Position, wenn die aktuelle Position 95 % beträgt) |
Auslöser | Magnetic switch. Join accept from Gateway, & Device is mounted | Internal timer | Internal timer | From activation: No Gateway connect From standard operation: 6 consecutive Gateway communication failures | Battery voltage < 2V | Flow sensor raw temperature 6°C
|
Radio communication interval (RCI) | 10 seconds for 5 minutes | 5 minutes 10 minutes 60 minutes 120 minutes 480 minutes | OFF | Three times 30 seconds Then once 2 minutes Then 60 minutes | OFF | OFF |
Dynamic change of communication interval | No | Yes | No | No | No | No |
Sensors (flow, ambient) | Active, every 10 seconds | Active | OFF
| Active | OFF | Active, every 2 minutes |
Freeze protection | Active, every 10 seconds | Active, every 150 seconds | OFF | Active, every 150 seconds | OFF | Active |
Motor operation | Reference run. Then active, according to Radio Communication | Active, according to Radio Communication | OFF | Active | OFF | OFF |
Monitoring of battery | Active, every 10 seconds | Active | OFF | Active | Active, every 12 hours | Active, every 2 minutes |
Internal temperature controller | If User Mode is Set Point Ambient Temperature: active | If User Mode is Set Point Ambient Temperature: active | OFF | If Safety Mode is Set Point Ambient Temperature: active | OFF | OFF |
Default upon activation and no downlinks | Setpoint ambient 20°C | Setpoint ambient 20°C RCI 10 minutes | Setpoint ambient 20°C |
Copyright Micropelt
General
Content
Integrations