Copyright Micropelt

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 7 Next »

FPort Number

Type of operation

Payload length

Description

Comments

0x00

MAC Commands

8 Bytes

RESERVED

0x01

  • Valve position % mode

  • Temperature setpoint mode (°C) with ambient or external temperature sensor

Downlink:

6 Bytes

Uplink:

11 Bytes

  • Actuator operation mode with valve position %

  • Self-regulation mode using the requested ambient setpoint temperature




Strongly recommended to always use an external temperature sensor

0x02

Report:

  • REV

  • Hardware Version

  • Firmware Version

Downlink:

0 Bytes

Uplink:

6 Bytes

Request:

  • REV

  • Hardware Version

  • Firmware Version

0x03 

 Motor Travel Distance

Downlink:

1 Byte

Uplink:

1 Byte

Configure motor travel distance (mm)

0x04 

 Data Rate

Downlink:

1 Byte

Uplink:

1 Byte

Configure LoRa data rate

Only supported in the MLR003R/ Radiator product line. Domestic hot water MLR003F is using ADR.

0x05

Slow Harvesting (SH) and valve Opening Point Detection (OPD)

Downlink:

1 Byte

Uplink:

1 Byte

  • Activate, configure, and deactivate OPD and SH

  • View status of OPD and SH

Only supported in the MLR003R/ Radiator product line.


  • No labels