MLR003R: Temperature Control Loop

To obtain an estimate of the ambient temperature, the device measures the flow temperature every 5 minutes and performs a moving average across the last 30 minutes. It then performs the following computation:

To achieve the instructed room temperature, the device applies the PI algorithm.

Attention REV <= 2.7: If a Room Temperature was provided through a Port 0x01 Downlink within the last 5 minutes, the device uses this; otherwise, it uses the estimated room temperature (internal ambient sensor).

The PI coefficients can be modified by sending a Port 0x07 Downlink.

The device considers moving the motor every 5 minutes.