MLR003RiUK61-07-1.1Performance Data MLR003RiUK61-07-1.1

Parameter	Range
Ambient operating temperature	0 to 40°C, max 70% rH
Flow pipe temperature	75°C max
Transportation & storage temperature range	-20 to +65°C, max 70% rH
Dimensions (LWH)	83 x 60 x 64 mm (63 x 60 x 64 without valve connector)
Weight	280 g (not including packing)
Operation at high altitude	Max 2000 m / 6500 ft above sea level
Max pin stroke (calibration range)	> 5.5 mm
Operating pin stroke (0-100%)	2.56 mm typical
Pin Stroke Resolution	Steps of 1%
Adjustment speed	0.727 mm/s typical
Stall force	100N
Noise level	< 35 dB(A) @ 70 N load
Radio Communication Interval (default)	10 minutes
Radio Communication Interval during Installation Cycle	10 seconds for 5 minutes
Radio Communication attempt Interval (after join fail or 6 consecutive communication fails)	3 * 10 seconds Then 2 minutes Then 60 minutes
Valve protection and Auto-off when active but not installed on valve body	Every 6 weeks: Execute run-in sequence. On pass return to previous position. On fail enter mounting position, communicate OFF and shut down.
Antifreeze	Valve side sensor <= 6°C
Safe position default	Depending on Safety Mode: Either default temperature setpoint Or default valve position Default: Setpoint Ambient 20°C
Operating Modes	Valve Position [%] Target Ambient Temperature (°C) Default: Valve Position
Accuracy of internal valve side temperature sensor	±0.5°C
Accuracy of internal ambient temperature sensor	±0.5ºC
Default offset of internal valve-side temperature sensor	+5K (Added to the raw sensor value FSRV)
Energy storage	LTO (Nominal 500mAh)
Energy generation minimum requirement	90 days / year @ 45ºC flow pipe temperature
Battery voltage flag (ES)	Battery-low flag will be set when battery voltage drops below 2.3V
Conformity Radio Radio EMC EMC EU Human Exposure Product safety	CE: EN300220-2V3.1.1 & EN300220-2V3.2.1 & EN300220-1V3.1.1 EN301489-1 V2.2.3 / -3 V2.1.1 EN55014-1 / -2 EN62479 EN60335
Radio specification	868.0 - 868.6 MHz, 14 dBm SF7