Copyright Micropelt
M30x1,5 grub screws theft protection - mounting instruction
This description is supposed to provide seamless installation of MLR003 devices with M30x1,5 theft protection grub screws.
The grub screw production position is controlled as much as possible.
In cases where the screw-in depth is slightly too deep and are blocking the retaining or security ring, please use this mounting instruction.
Article number of the relevant device: MLR003RiEU-61t
Step | Action |
1 | Take the MLR003 and the allen key. 
|
2 | Turn the grub screws on the union nut out a few turns by using the allen key.
|
2.1. | Pictures showing the screw position: tightened screws Loosened screws (by unscrewing them a little bit)
|
3 | The grub screws on the union nut now align with the inner part of the union nut. → The device can be mounted as usual
|