Copyright Micropelt

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Current »

The Flow Temperature is calculated as follows:

An offset occurs between the flow temperature sensor installed in the MLR003 and the actual temperature in the water circuit. (This offset is due to thermal transitions: a temperature drop in the valve itself, and via the valve connection/adapter to the MLR003 sensor.) This offset is compensated by the automatic offset correction function in the MLR003.

Therefore, the device uses the following automatic offset correction:

The Ambient Temperature Estimate is calculated as follows:
  • No labels