Copyright Micropelt

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

« Previous Version 16 Next »

Rev.-No.

Description of Revision

Revised

by

Date

 

v8e has been derived from the Micropelt technology platform description v7e.

 Changed name to MLR003.

Document describes the first release of MLR003.

Most recent changed against the general-purpose platform description.

 

 

v8e

  • Removed Summer mode

  • Added 480min RF CI in Payload

  • Added temperature offset for valve- and ambient-sensor.

  • Added harvesting halt during radio communication.

Schmidt

Volkert

2021-01-21

v10e

  • Change product name to MLR003

  • General update on description and user guide

Volkert

2021-06-21

v11e

Change downlink payload

Added Label spec.

Becky

Volkert

2021-06-22

v12e

Change Activating from Mounting Position operating flow diagram

Changed front page picture of MLR003

Becky

Volkert

2021-08-04

2021-08-20

v13e

Full document review

Update cover page, headlines, added sect. 7.2

Becky

Volkert

2021-09-22

2021-09-23

v14e

Adjust speaker beeping communication in user interface

Added SF7BW125 to front page

Removed downlink “reserved” bytes 7 and 8

Added picture of MLR003-KEY

Becky

Volkert

2021-09-28

2021-10-11

v15e

Added clauses and information required by product safety, EN60335-1:2012.

Described the position of the labels

Corrected distortion of “CE”-print on product label

Schmidt

2021-11-05

v16e

Added certification details

Added contact email devicecredentials@micropelt.com

Corrected NFC-Tag label (16.2)

Volkert

2021-11-19

v17e

Update from Rev1.0 to Rev1.1:

  • Extend Uplink payload to include User Mod and User Value

  • Extend motor Reference Run travel distance

Added declaration of conformity (CE)

Becky

Volkert

2022-01-24

Added new section 09.11 Battery Charging Flow Chart

Bala

2022-02-16

Changed product name and article number to MLR003RiEU61-07-1.1

Volkert

2022-02-23

v18e

Update from Rev1.1 to Rev1.3:

Remote Commissioning:

  • Port 2: Version

  • Port 3: Motor Travel Distance

  • Port 4: LoRa Data Rate

Becky

2022-05-26

v18e

Update from REV 1.3 to REV1.4

  • Increased Zero Drift Compensation range to 30%

Bala

2022.11.30

v18e

Update from REV 1.4 to REV1.5

  • Increased Motor Force to reduce Zero Drift

Bala

2023.01.20

v18e

Update from REV 1.5 to REV1.6

  • Reduce default Ambient Temperature from 20°C to 19°C

  • Reduce ACK frequency from every Uplink to up to every 30 minutes

Bala

2023.01.23

v18e

Update from REV 1.6 to REV1.8

ESD protection:

While in Mounting, set a timer for 8 hours. Every 8 hours, wake up and (re)set to radio to Sleep Mode, and (re)configure the reed contact.

Bala

2023.03.27

  • No labels