MLR003RiEU61-07 Operating Modes

	Installation cycle	Standard operation	Idle state	Radio failure	Forced heating	Freeze Protection
Comments		Valve target % Or Room target temperature	Phases between monitoring, communicating, and motor movement	Uplinks not received by the gateway	Valve opens to 50% (or remains in current position if current position is 50%)	Valve opens to 95% (or remains in current position if current position is 95%)
Trigger	Magnetic switch. Join accept from Gateway, & Device is mounted	Internal timer	Internal timer	From activation: No Gateway connect From standard operation: 3 consecutive Gateway communication failures (9x RCE)	Battery voltage < 2.2V	Flow sensor raw temperature 6°C
Radio communication interval (RCI)	10 seconds for 5 minutes	5 minutes 10 minutes 60 minutes 120 minutes 480 minutes	OFF	Three times 30 seconds Then once 2 minutes Then 60 minutes	OFF	OFF
Dynamic change of communication interval	No	Yes	No	No	No	No
Sensors (flow, ambient)	Active, every 10 seconds	Active	OFF	Active	OFF	Active, every 2 minutes
Freeze protection	Active, every 10 seconds	Active, every 150 seconds	OFF	Active, every 150 seconds	OFF	Active
Motor operation	Reference run. Then active, every 10 seconds	Setpoint Ambient Temperature: Active, every 5 minutes Valve Position: According to radio communications	OFF	Active, every 5 minutes	OFF	OFF
Monitoring of battery	Active, every 10 seconds	Active	OFF	Active	Active, every 12 hours	Active, every 2 minutes
Internal temperature controller	If User Mode is Setpoint Ambient Temperature: active	If User Mode is Setpoint Ambient Temperature: active	OFF	If Safety Mode is Setpoint Ambient Temperature: active	OFF	OFF
Default upon activation and no downlinks	Setpoint Ambient Temperature 19°C	Setpoint Ambient Temperature 19°C RCI 10 minutes		Setpoint Ambient Temperature 19°C