Copyright Micropelt

Skip to end of banner Go to start of banner

MLR003 Firmware Update Tool

Skip to end of metadata

Created by Becky, last modified on 2024-01-09

Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Prerequisits

Get the latest Firmware Updater Tool from Micropelt by contacting us at the following mail

Please contact Becky (becky@micropelt.com) for the latest updater tool and further questions

STM32 Cube Programmer should be installed
- https://www.st.com/en/development-tools/stm32cubeprog.html
Windows Driver Kit should be installed
- https://docs.microsoft.com/en-us/windows-hardware/drivers/download-the-wdk
A USB A to micro-USB cable should be connected
An RFID reader should be connected
- ACS ACR1252U preferred with appropriate drivers
- https://www.identible.de/acs-acr1252u-usb-nfc-reader.html
- https://www.acs.com.hk/en/driver/342/acr1252u-usb-nfc-reader-iii-nfc-forum-certified-reader/

Process

Notes

The Firmware Updater Tool retains the original Application Key for each device. Thus, if the device will continue communicating with the same Gateway, then there is no need to update the device credentials within the Gateway.

Photos of opening a device

Problems and Possible Solutions

If flashing fails, try plugging the USB into a powered USB hub
If flashing fails, try a different USB cable

No labels