1. | Gateway-ConfigurationLoad the device credentials DEVEUI, APPEUI (JOINEUI) and APPKEY supplied with the MLR003 into your gateway. |
2. | InstallationThe MLR003 is delivered in the mounting position = OFF. |
3. | Activation and operationActivate the MLR003 by briefly touching the micropelt logo on the MLR003 with the magnetic pen (see picture).
Normal operation: For the first 5 minutes after activation the device will communicate every 10 seconds. Thereafter the device communication intervals are as specified in the downlink. Failure: Long acoustic signals indicate failed operations. |
4. | Deactivation or RESETTo deactivate, unmount the MLR003 from the radiator valve and perform a manual RESET. To perform the RESET, hold the magnetic pen to the micropelt logo for five seconds (tone signal and 1x LED). The MLR003 restarts. When unmounted, the MLR003 will fail its reference run, go into mounting position, and switch OFF. |
| Additional things to know
|
|
|
| Tel: +49 761 59026190
|
Copyright Micropelt
General
Content
Integrations