Login into the Wattsense console via the following address https://console.wattsense.com/login?redirect=/boxes-map
If you don't have a login, please contact Wattsense Customer Support
To add a new device, open the Configuration Wizard by navigating to the following
Boxes → Configuration → Equipment → Add Equipment → Configuration Wizard
Choose Select Equipment
Choose micropelt - mlr_003 under equipment name
Choose LORAWAN_V1_0 as the version
Enter the Equipment Name, DEVEUI, APPEUI and APPKEY of the device and click Next
Select all the properties that needs to be decoded and displayed. (It is recommended to select all the properties)
Click Save Changes and click Send to Box to add the device to the Gateway
Mount the device on the valve and activate it by holding the magnet on the “micropelt“ logo for 1 second
The device will join the gateway and do a reference run (indicated by beeps and LED)
Beep-Beep (2x RED LED) → Successfully Joined to Gateway
Beep-Beep-Beep (§x RED LED) → Successfully finished Motor Reference Run
Long Beep (Failed to Join to Gateway / Failed Motor Reference Run)
Once the above step is completed, the decoded messages can be viewed in the Live Data Tab
Raw Payload and Encoded Downlink Message options are also available in the Live Data Tab
Use excel decoder tool to prepare the 6 byte downlink message
Paste the hex data into the encoded downlink message property in the format
<hex_message>:<port>
Click Save
The device will receive the downlink in the next radio message cycle
