Defaults | Changed through downlink | |
P coefficient | 20 | 15 |
I coefficient | 1,5 | 1,5 |
D coefficient | 0 | 0 |
Correction factor z | ||
D coefficient when closed | 0 | 0 |
Closed percent | 0 | 0 |
Offset percent | 0 | 0 |
Style | Standard Style | Unchanged = Default |
Integral unwind (do_back calculate) | False | Unchanged = Default |
Motor operating range | 1.872 mm | Unchanged = Default |
Firmware | 2024.08.08.02 |
Device is running with “z“ factor set to 0,1 Flow temperature is increased to 65° |
 |
FTMP (flow smoothened) = (0,2C + 1,2Ct-1 + 1Ct-2 +0,8Ct-3 + 0,6Ct-4 + 0,3Ct-5 +0,1Ct-6 ) / 4,2 Weighted smoothing of the last 7 values. Division method With additional correction, the influence of which depends on how much the flow values have changed from one measured value to the next. Cc (Flow corrected) = if (Cs - z * (Cs - 0,5 * (Cst-3+Cst-4)) < B then ( B ) else (Cs - z * (Cs - 0,5 * (Cst-3+Cst-4)) The ATMP value is the Ambient Estimate calculated based on your formula ATMP = B * ( B/ Cc) ^ 1,2 where B = Ambient Raw Cc = Flow corrected |