Copyright Micropelt

Skip to end of metadata
Go to start of metadata

You are viewing an old version of this page. View the current version.

Compare with Current View Page History

Version 1 Next »

This article explains how to configure and use The Things Network (TTN) to view packets from MLR003R devices.

Pre-Requisites:

  1. TTN Account

  2. Compatible Gateway with Packet Forwarder enabled (Please refer to the documentation of your gateway on how to set it)

\uD83D\uDCD8 Instructions

Visit TTN Cloud Console and Log-In into your Account and select Applications

Create a new Application if needed or use an existing one

Click “Register End Device“

Choose “micropelt” from “End device brand“ and select “MLR003“ as model

Choose “Europe 863-870 MHz (SF9 for RX2 - recommended” as the Frequency Plan

Enter the JoinEUI/AppEUI of the valve actuator and Click Confirm

Enter the DevEUI, AppKey and the End device ID and click “Register End Device“

The device will be registered to TTN and you can check the incoming messages from the Live Data tab

You can send downlinks from the “Messaging“, “Downlink“ tab

  • No labels