How to Use TTN to view MLR003 packets

This article explains how to configure and use The Things Network (TTN) to view packets from MLR003R devices.

 Instructions

1. Visit TTN Cloud Console and Log-In into your Account and select Applications

2. Create a new Application if needed or use an existing one

3. Click “Register End Device“

4. Choose “micropelt” from “End device brand“ and select “MLR003“ as model

5. Choose “Europe 863-870 MHz (SF9 for RX2 - recommended” as the Frequency Plan

6. Enter the JoinEUI/AppEUI of the valve actuator and Click Confirm

7. Enter the DevEUI, AppKey and the End device ID and click “Register End Device“

8. The device will be registered to TTN and you can check the incoming messages from the Live Data tab

9. You can send downlinks from the “Messaging“, “Downlink“ tab

10. You can use our “Excel Decoder Tool“ to generate Downlink messages

MLR003 Payload Encoder/Decoder

Open

Open