Copyright Micropelt

MLR003F: Temperature Control Loop

Owned by Becky (Unlicensed)
Last updated: 2024-09-04 by Balamurugan Sadasivam
1 min read

The device measures the flow temperature every 5 minutes.

 

The device moves the motor every 60 minutes. To compute the motor movement, the device computes the flow moving average over the last 35 minutes and then applies a Proportional Controller Gain algorithm.

 

 

The default value of “Proportional Controller Gain” is 1. It can be modified via the Port 1 Downlink packet ( Abbreviation: GAIN).