/
Energy harvesting/Power generation, recharging from a radiator
Copyright Micropelt
Energy harvesting/Power generation, recharging from a radiator
- Fritz Volkert
Owned by Fritz Volkert
Measurement of time to recharge an empty MLR003 battery LTO 500mAh from a radiator with 45°C flow temperature:
Measured by M Schmidt martin.schmidt@micropelt.com
TIME TO FULLY CHARGE 500mAh FROM 45°C FLOW = ~30 DAYS @ 24hour operation
Measurement of real harvesting and charge current into the battery (net charge current):
Measured by M Schmidt martin.schmidt@micropelt.com
Vorlauf | Flow temperature |
I battery | Actual charge current into battery Peak current behavior at harvesting start due to highest temperature gradient between source and sink |
MPPT | Maximum power point tracking |
VBAT | Charge current increases when V battery is lower |
Related content
Manual battery recharge EnOcean MVA-003/4/5
Manual battery recharge EnOcean MVA-003/4/5
Read with this
Energy Harvesting - Power generation versus consumption
Energy Harvesting - Power generation versus consumption
More like this
LTO Lithium Titanate (used in MLR003)
LTO Lithium Titanate (used in MLR003)
Read with this
Power Management
Power Management
More like this
AISI304 Adapter-RA2 (Stainless steel)
AISI304 Adapter-RA2 (Stainless steel)
Read with this
Energieerzeugung
Energieerzeugung
More like this